The oil filter element is mainly used for the filtering of oil products in the hydraulic system, and is installed in the filter and oil filter in the hydraulic system. According to the installation position in the hydraulic system, the hydraulic oil filter element is divided into oil filter element, pressure pipe oil filter element, and oil return oil filter element. The classification and different purposes that CQMQ will make oil filter element for everyone:

Oil oil filter element: fuel -absorbing pipeline (fuel tank -inlet of hydraulic pump) or directly installing the oil -absorbing filter element in the fuel tank is a necessary measure to protect the hydraulic pump. The accuracy is generally 100 to 180 μm. Differential determination, excessive flow resistance causes hydraulic pumping gas erosion.

Pressure pipe Hydraulic oil filter element: The oil filter element of the pressure pipeline is not only a component that protects its downstream, as the main oil filter to ensure the pollution of oil pollution in the system. Through its own efficient purification of the oil, the hydraulic pump is also very good. The protection effect is 5-10 μm, the filter is high, and the vibration is also very interesting. The permit pressure difference between the oil filter element of the pressure pipeline is 0.3 to 0.7MPa according to the level of different pressure.

Because the filter does not have a unified division method, the filter can be classified from the characteristics of various filters. Filters divided according to the pressure level are divided into three categories: high -pressure filters, low -pressure filters, and mid -pressure filters. The differences of the three filters are 16MPa and 1.6MPa, and the pressure is greater than 16MPa. MPA) is called a low -voltage filter.